Calculators › Water Heating

Hot Water Cylinder Jacket Standby Loss Savings

Estimate annual kWh saved by wrapping an older uninsulated or thinly insulated hot water tank.

Allowed range: 0.5 to 6
Allowed range: 15 to 55
Allowed range: 0.02 to 1.5

Calculation Results

Planning & Safety Note: Calculations use engineering estimates for planning purposes. Consult a licensed electrician or certified HVAC installer before modifying electrical panels, breakers, or heating equipment.

Formula & Methodology

Annual Saved = Old Standby × (Reduction% / 100) × 365.

Key Assumptions

Older cylinders lose 1.8–3.0 kWh/day; an 80mm jacket cuts 30–45%.

Limitations

Never cover thermostat access panels, pressure valves, or gas flues.

Reference Standards

  • Array
  • Array
  • Array

Related Energy Guides

Heat Pump Water Heaters: UEF Ratings, Room Volume, and Payback

Heat pump water heaters use two-thirds less electricity than standard electric tanks, but their real-world efficiency depends on Uniform Energy Factor (UEF), surrounding air volume, and ambient temperature. This guide breaks down sizing, acoustic placement, and worked US, UK, and EU payback calculations.

Safe Water Heater Temperatures: Anti-Legionella Rules and Mixing Valves

Turning a storage water heater down to 50°C saves minimal energy while creating ideal conditions for Legionella bacteria, whereas delivering 60°C water straight to taps causes severe scalds in seconds. Here is how thermostatic mixing valves solve both hazards and how much 60°C storage actually costs.